Customized Medical Aneroid Sphygmomanometer Riester Sphygmomanometer with competitive price in China. Medical Aneroid Sphygmomanometer Riester Sphygmomanometer is used to measure systolic and diastolic blood pressure.
1. Product Introduction of Medical Aneroid Sphygmomanometer Riester Sphygmomanometer
Medical Aneroid Sphygmomanometer Riester Sphygmomanometer is a tool used to measure systolic and diastolic blood pressure. Different models and colours of Medical Aneroid Sphygmomanometer Riester Sphygmomanometers available
2. Product Specification of Medical Aneroid Sphygmomanometer Riester Sphygmomanometer
Ref. No.: |
Description: |
GCDE310101 |
50*14cm,black cuff |
GCDE310102 |
50*14cm,grey cuff |
GCDE310103 |
50*14cm,navy blue cuff |
GCDE310105 |
50*14cm,green cuff |
Ref. No.: |
Description: |
GCDE310201 |
50*14cm,black cuff |
GCDE310204 |
50*14cm,blue cuff |
Ref. No.: |
Description: |
GCDE310301 |
50*14cm,black cuff |
GCDE310304 |
50*14cm,blue cuff |
GCDE310305 |
50*14cm,green cuff |
GCDE310306 |
50*14cm,red cuff |
Ref. No.: |
Description: |
GCDE320201 |
50*14cm,black cuff |
GCDE320202 |
50*14cm,grey cuff |
GCDE320203 |
50*14cm, navy blue cuff |
GCDE320204 |
50*14cm,blue cuff |
Ref. No.: |
Description: |
Type: |
GCDE310505 |
Cartoon cuff |
Child use |
Ref. No.: |
Description: |
Type: |
GCDE410204 |
50*14cm,blue cuff |
With attached single head stethoscope |
GCDE410304 |
50*14cm,blue cuff |
With attached single head stethoscope |
Ref. No.: |
Description: |
Type: |
GCDE410411 |
50*14cm,lavender cuff |
With rappaport stethoscope |
Ref. No.: |
Description: |
Type: |
GCDE440104 |
50*14cm,blue cuff |
With separate single head stethoscope |
GCDE440204 |
50*14cm,blue cuff |
With separate dual head stethoscope |
Ref. No.: |
Description: |
Type: |
GCDE510204 |
50*14cm,blue cuff,blue PVC bulb |
Palm type |
GCDE510706 |
50*14cm,red cuff,red PVC bulb |
Palm type |
GCDE510802 |
50*14cm,grey cuff,grey PVC bulb |
Palm type |
GCDE510903 |
50*14cm,blue cuff,blue PVC bulb |
Palm type |
GCDE511002 |
50*14cm,grey cuff,grey PVC bulb |
Palm type |
GCDE520902 |
50*14cm,grey cuff,grey PVC bulb |
Palm type,two tubes |
Ref. No.: |
Description: |
Type: |
GCDE530104 |
50*14cm,blue cuff,blue PVC bulb |
Palm type,with attached single head stethoscope |
Ref. No.:
Type:
GCDE620103
Desk Type
Ref. No.: |
Type: |
GCDE620201 |
Desk Type |
Ref. No.: |
Type: |
GCDE620503 |
Desk Type |
Ref. No.: |
Type: |
GCDE620601 |
Wall Type |
Ref. No.: |
Type: |
GCDE620801 |
Clock Type |
3. Feature of Medical Aneroid Sphygmomanometer Riester Sphygmomanometer
1. Nylon cuff.
2. Available in different colors of cuff.
4. Direction for use of Medical Aneroid Sphygmomanometer Riester Sphygmomanometer
● The patient should sit or lie comfortably. The arm should be fully supported on a flat surface at heart level.
● Place the cuff over the bare upper arm with the artery mark positioned directly over the brachial artery. The bottom edge of the cuff should be positioned approximately (1”) one inch (2-3cm) above the antecubital fold. Wrap the end of the cuff not containing the bladder around the arm snugly and smoothly and engage adhesive strips.To verify a correct fit, check that the Index Line falls between the two Range Lines.
● Close the valve by turning thumbscrew clockwise. Palpate the radial artery while inflating the cuff. Be sure to inflate cuff quickly by squeezing bulb rapidly. Inflate cuff 20-30 mmHg above the point at which the radial pulse disappears.
● Position the chestpiece in the antecubital space below the cuff, distal to the brachium. Do not place chestpiece underneath the cuff, as this impedes accurate measurement. Use the bell side of a combination stethoscope for clearest detection of the low pitched Korotkoff (pulse) sounds.
● Open the valve to deflate the cuff gradually at a rate of 2-3mmHg per second.
● Record the onset of Korotkoff sounds as the systolic pressure,and the disappearance of these sounds as diastolic pressure.
5. FAQ of Medical Aneroid Sphygmomanometer Riester Sphygmomanometer
Q: What is the delivery time if I place my order?
A: Delivery time is around 45 days, if you have special requirements, pls check with us, we will try our best to meet you.
Q: Can you supply the relevant documentation?
A: Yes, we can provide most documentation including CE, ISO13485, FSC, FDA where required.
Q: Can I get samples before my order ?
A: Free samples are available.
Q: If OEM is acceptable?
A: Yes, our designer is very professional, we could make design as per your idea for packages.